ATP Meter with Swabs Hygiene Monitor Device ATP Tester Machine Bacteria Detector NEUATP01
$1,790.00$1,990.00 (-10%)
Adenosine tri-phosphate (ATP) is a molecule found only in and around living cells in like all animal, plant, bacteria and yeast, and as such it gives a direct measure of biological concentration and health. ATP is quantified by measuring the light produced through its reaction with the naturally-occurring firefly Luciferase using a Luminometer. The amount of light produced is directly proportional to the amount of living organisms present in the sample.
Biolum III Portable ATP Hygiene Monitoring System, a powerful tool for implementing and managing your hygiene monitoring program. Taking advantages of the progressive QuickSwarb surface test, the hygiene level of the tested surface will be evaluated in seconds, and the results can be visualized on screen. Featuring the state-of-art technology, the BioLumIII is a user-friendly, flexible, and accurate quality monitoring system. It has all the features to maximize its value to your business.
Specifications
Atp tester machine NEUATP01 characteristics:
Practicability —— The upper and lower limits can be set according to the requirements of environmental testing, so that data can be quickly evaluated and warned, and surface cleanliness can be quickly screened. High sensitivity-10-15 ～ 10-18 mol Fast speed-the conventional cultivation method is more than 18-24h, while ATP only needs more than ten seconds. Feasibility-The number of microorganisms has a clear correlation with the ATP contained in the microorganisms. By detecting the ATP content, the number of microorganisms in the reaction can be indirectly obtained Maneuverability-Traditional training methods need to be operated by trained technicians in the laboratory; and ATP rapid cleanliness testing is very simple to operate, and only simple training can be performed by ordinary staff on site. Better experience —— The test tube adopts a plug-in flexible design, which can be cleaned regularly for long-term use and extend the life of the instrument.
Monitor device ATP tester machine NEUATP01 main parameters:
1. Display: 3.5-inch high-precision graphic touch screen
2. Processor: 32-bit high-speed data processing chip
3. Detection accuracy: 1 × 10-18mol
4. Coliform group: 1-106cfu
5. Detection range: 0 to 9999 RLUs
6. Detection time: 15 seconds
7. Detection interference: ± 5 ﹪ or ± 5 RLUs
8. Operating temperature range: 5 ℃ to 40 ℃
9. Operating humidity range: 20-85 ﹪
10. ATP recovery rate: 90-110%
11. Detection mode: RLU, coliform screening
12. 50 user ID settings
13. The number of result limits that can be set: 251
14. Automatically judge pass and fail
15. Automatic statistical pass rate
16. Built-in self-calibration light source
17. 30 seconds self-test after booting
18. Equipped with mini USB interface, you can upload the results to PC
19. Equipped with special software driver U disk instead of traditional CD
20. Instrument size (W × H × D): 188 mm × 77mm × 37mm
21. Use rechargeable lithium battery to avoid battery replacement
22. Standby state (20 ℃): 6 months
23. Stable liquid luciferase
24. Wet integrated collection swab
