Waste Incinerator is a kind of machine that was developed on the basis of Japanese technology, absorbs advantages of similar equipment both at home and abroad. It features unique and advanced merits with compact size, high burning effect, reasonable burning technology, high degree of non-harm etc. It is an ideal choice for waste treatment of hospitals, hotels and various areas.

• Gasified pyrolysis incineration is used for burning many kinds of waste.
• Waste can be burned once everyday by gasified incineration.
• Gasified incineration, mixed incineration and burnout treatment ensures low emission standard of dust, dioxin etc.
• Totally enclosed operation is suitable for treating infectious waste to avoid secondary pollution.
• Compact structure and small land occupation.

Power supply: AC220V + 10%; 50Hz + 1Hz
Skin thickness: 0-0.75 mm and incremental interval: 0.05 mm
Skin width: 2.5 cm, 3.8 cm, 5.1 cm, 7.6 cm, 10.2 cm
Removable  handle connection line
Control mode: Handheld control, easy to operate;
Sterilization mode: whole machine can be sterilized under high temperature and pressure

The design of this machine makes it possible to manufacture a variety of mesh-like film technology. The mesh skins of different specifications are produced using the corresponding skin carrier plates, without the need to change tools, which greatly reduces the medical cost. The width of the skin treatment is up to 80 mm, and the length of the treated skin can be practically unlimited. The whole machine can be sterilized at high temperature without lubrication and maintenance.

Working Distance: The distance from cornea is 40mm, Errors: ±2mm
Field of Vision Scope: 45°
Horizontal Angle: ±30°
Up and down Angle: ±12.5°
The Size of Outer Ring: φ7.4mm;
The Size of Inner Ring: φ4mm
Filters: Stimulating Filter (red & blue);
Depth of field contraction distance: ≥5mm
Refractive compensation：+15D

1.Sphere range-12.0D ~ +12.0D
2.Sphere tolerence±0.5D
3.Cylinder range-5.0D ~ +5.0D

• Part of Embedding Center, work independently.
• The newest high technology a new type of freezing material.
• Automated processor control system.
• Special nano technical make it heat up quickly and equably.
• Multilevel security protection system.

• The newest high technology and Button Panel Control, new type of heating material.
• The machine is made up of embedding machine, freezing part .the design can be flexibly selected between embedding machine and
  freezing part.
• Automated processor control system make it possible for presetting the start time and temperature of any day
• Special nano technical make it heat up quickly and equably
• The LCD display can show you the temperatures of the paraffin bath, thermostatic bath and paraffin nozzle. So the user can
  operator it easily.
• Inductive head lamp and metal switch ,user can touch the switch by tweezers or knifes to control the paraffin.
• Automatic memory the presetting temperatures and start to work based on the time.
• Large capacity crock can contain enough paraffin for use at one time.
• Multilevel security protection system.
• There are 3 heating hole for forceps in two side of the paraffin nozzle.

Product specifications :
Key components such as guide rail, screw mandrel, Ratchet rod are import from Japan. The Rotary microtome MSLK237 is ideal for most routine histology, biological and industrial needs. High precision & stability ensures exact reproducible section quality in wax and plastic embedded sections.
Product specifications :
• High precision specimen feed,
• Universal cassette clamp and standard specimen clamp,
• The hand wheel can be locked in any position or highest position, The dual fail-safe control system is safe and reliable,
• It adopt the special blade holder, it is more safe and convenient to use the disposable blade directly, good durability and long service life,
• Smoothly running handwheel,
• Spacious, integrated section waste tray.

The system is extensively used at hospital, epidemic prevention, agriculture, forestry and other scientific research institutions. It make up with advanced third computerized thermostatic power semiconductor refrigeration, Cryo-Scalpel, Cryo-console . The power is made of advanced nanometer material, it has the characteristics of light, no noise. The LCD display can show the temperature of the Cyro-scalpel and Cryo-console at the same time.
The system have the characteristics of working evenly, freezing fast, and operating easily, stably and conveniently. The angle between Cryo-console and Cryo-scalpel is 45° which made the tissue attached to the slice easily.
In addition to rapid freezing slice, the system is also can regular paraffin slice.

Product specifications:
Improved machine on the basis of MSLK242, Adopted Precision Roller Cross Guide. Made of strength alloy steel. Perfect performance for slice soft tissue, it used particularly to slice hard tissue, such as plastic, fibre, bone, plant, hair. The ideal microtome for research institution, laboratories, and medical pathology.

Technical Data:
1) Section thickness range: 1-30 μm
2) Minimum setting value: 1μm
3) Precision error: ± 5%
4) Maximum section size:60×30mm

The system is extensively used at hospital, epidemic prevention, agriculture, forestry and other scientific research institutions. It make up with advanced third computerized thermostatic power semiconductor refrigeration, Cryo-Scalpel, Cryo-console . The power is made of advanced nanometer material, it has the characteristics of light, no noise. The LCD display can show the temperature of the Cyro-scalpel and Cryo-console at the same time.
The system have the characteristics of working evenly, freezing fast, and operating easily, stably and conveniently. The angle between Cryo-console and Cryo-scalpel is 45° which made the tissue attached to the slice easily.
In addition to rapid freezing slice, the system is also can regular paraffin slice.

The system is extensively used at hospital, epidemic prevention, agriculture, forestry and other scientific research institutions. It make up with advanced third computerized thermostatic power semiconductor refrigeration, Cryo-Scalpel, Cryo-console . The power is made of advanced nanometer material, it has the characteristics of light, no noise. The LCD display can show the temperature of the Cyro-scalpel and Cryo-console at the same time.
The system have the characteristics of working evenly, freezing fast, and operating easily, stably and conveniently. The angle between Cryo-console and Cryo-scalpel is 45° which made the tissue attached to the slice easily.
In addition to rapid freezing slice, the system is also can regular paraffin slice.

Improved machine on the basis of MSLK242 , Adopted Precision Roller Cross Guide. Made of strength alloy steel. Perfect performance for slice soft tissue, it used particularly to slice hard tissue, such as plastic, fibre, bone, plant, hair. The ideal microtome for research institution, laboratories, and medical pathology.

1) Section thickness range: 1-40 μm
2) Minimum setting value: 1μm
3) Precision error: ± 5%
4) Maximum section size:: 60× 40mm
5) Dimension:400×350×350mm
Download NEUK245 User Manual

◆ LED display
◆ Self-diagnostic prompt.
◆ Cassette clamp and C clamp are optional
◆ Specimen orientation on X/Y axes 8°
◆ Alarm to warn of forward or backwards limitation.
◆ Streamlined molded housing results in attractive appearance and is easy to clean.
◆ Full-automatic sectioning with adjustable speed and three sectioning modes: continuous, step and single.
◆ Unit contains a handwheel force balancing system for adjusting the balancing force during sectioning, making rotation even and smooth;
◆ Two safety locking mechanisms on the handwheel; one locks on the top; the other locks at any position

The Semi-automatic Cryostat Microtome, is used for rapid freezing of pathological sections of human and animal body tissue. It can be widely used for pathological diagnosis, analysis and research in hospitals, medical colleges, and by legal medical experts and propagation institutes.
The cryostat microtome is the eighth generation of our cryostat. It utilizes advanced horizontal feeding, The specimen chamber area is much larger than previous models.
The instrument consists of 4 major parts:
1.1 The computer control panel is on the upper part. This area displays the temperature and the general working conditions of the instrument.
1.2 The center part is the constant low temperature chamber used to rapidly freeze the tissue and to conduct the cutting.
1.3 Behind the chamber is the mechanical transmission and motor drive.
1.4 The lower part is the compressor unit, cooling condenser and evaporator.
Application: To get pathological sections of plant, animal or human tissues to study the histology.
Only use within the scope of this specification prescribed.

1.Anti-inflammatory, detumescence and Analgesia after the surgery
2.Various physiological and pathological fractured, delayed union, nonunion, bone defect.
3.Contusion of soft tissue, joint sprain and strain of lumbar muscles, lumbar disc herniation, shoulder bursitis and sciatica, nerve injury or inflammation caused by paralysis and peripheral nerve disorders.
4.Improve the clinical symptoms of Avascular Necrosis.

It is the Obstetrics and Gynecology treatment products, based on low frequency electric therapy theory and actual situation of low frequency pulse current treatment, set up several treatment according to the most optimal manner, controlled automatically by computer chip, stimulate the specific position of the human body by the special treatment of low-frequency,produce physical effect effect on specific parts of the body, and adjust the human body environment, to clear the breast tubes, promote milk secretion. accelerate the recovery of the uterus, promote postpartum urination, reduce postpartum pain,accelerate healing.and so on.

1.Lactation lack at Post partum
2.Dredge breast
3.Mammitis
4.The recovery of the uterus
5.Diastasis recti abdominis
6.Chronic pelvic inflammation and vaginal relaxation
7.Retention of urine
8.Postoperative analgesia
9.Pelvic floor muscle repair
10.Body recovery